TYAN S1686D страница 49 Скачать руководство пользователя | Manualshive

Страница: 49 / 60

background image

------------------------------------------------------------------------------------------------------------------------------------------------

Pentium II Motherboards AMI BIOS Setup -Page

20-

Chipset Setup,

Continued

Deturbo Mode

Set this option to Enabled to enable deturbo mode. The settings are Enabled or
Disabled. The Optimal and Fail-Safe default settings are Disabled.

TypeF DMA BufferControl1
TypeF DMA Buffer Control2 These options specify the DMA channel where TypeF buffer control is

implemented. The settings are Disabled, Channel-0, Channel-1, Channel-2, Channel-3,
Channel-5, Channel-6, or Channel-7. The Optimal and Fail-Safe default settings are
Disabled.

Power Interrupt Set this option to Enabled to activate the function of Power Interruption. When

“Enabled”, the power of the system will be automatically turned on after a power
interruption (outage). The user does not need to hit the Power-on switch on the case to
turn on the power. The settings are Enabled or Disabled. The Optimal and Fail-Safe
default settings are Disabled.

USB Function

Set this option to Enabled to enable USB (Universal Serial Bus) support. The settings
are Enabled or Disabled. The Optimal and Fail-Safe default settings are Enabled.

USB Keyboard/Mouse Legacy Support Set this option to Enabled to enable support for older keyboards

and mouse devices if the USB Function option is set to Enabled. The settings are
Enabled or Disabled. The Optimal and Fail-Safe defaults are Disabled.

USB Passive Release Enable Set this option to Enabled to enable passive release for USB. The settings

are Enabled or Disabled. The Optimal and Fail-Safe default are Disabled.

«
...
47
48
49
50
51
...
»

Содержание S1686D





























































Отзывы:

Нет отзывов

Похожие инструкции для S1686D

Бренд: Meccanica Fadini Страницы: 4

Бренд: ST Страницы: 79

Бренд: MaxLinear Страницы: 25

Бренд: Diamond Systems Страницы: 112

Бренд: Analog Devices Страницы: 9

Бренд: Maxtang Страницы: 13

GA-Z97X-Gaming G1

Бренд: Gigabyte Страницы: 136

STEVAL-LLL002V1

Бренд: STMicroelectronics Страницы: 29

IN440 Micro-ATX

Бренд: trimond Страницы: 47

Бренд: ASROCK Страницы: 71

Бренд: Asus Страницы: 82

Бренд: Asus Страницы: 46

Бренд: Asus Страницы: 48

Бренд: Asus Страницы: 48

Бренд: Asus Страницы: 80

Бренд: Asus Страницы: 86

Бренд: Asus Страницы: 48

Бренд: Asus Страницы: 112

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды