TWR Lighting E-2/3DB, Руководство пользователя

Страница: 7 / 49

E-2/3DB CONTROLLER
E:\Documents and Settings\Administrator\Local Settings\Temporary Internet Files\OLK3\E2-3DB.doc
Rev. 01/13/00; Rev. 07/2000 o2L/H
Rev. 10/2000 (dwgs. 100239, 601, 601-01, 601-02, H02-258, 100031, 279L, 274S, 100089)
Rev. 06/21/00 (Reformatted Text; Revised Pg. 3 (2.4.1, 20 amp to 30 amp)
Pg. 3
connected to the socket terminal marked "R." These socket connections are
made by using .25" quick connect terminals which must be crimped to the
wires. The photocell should be positioned so that it does not "see" ambient
light, which would prevent it from switching to the nightmode.
If the control cabinet is mounted outside an equipment building, the photocell
should be mounted vertically on ½” conduit so the photocell is above the
control cabinet. Care must be taken to assure that the photocell does not
"see" any ambient light that would prevent it from switching into the
nightmode. The photocell housing socket wiring is the same as above.
2.3.1 Connect the BLACK wire from the photocell to terminal block TB2-5.
2.3.2 Connect the RED wire from the photocell to terminal block TB2-6.
2.3.3 Connect the WHITE wire from the photocell to terminal block TB2-7.
2.3.4 Install the photocell into the receptacle and twist to the right while
depressing to lock into place.
2.4 POWER WIRING
(Refer to Drawing H40-279)
Power wiring to the control cabinet should be in accordance with local
methods and the National Electric Code (NEC).
2.4.1 A 30 amp circuit breaker is recommended at service panel
2.4.2 Connect the "HOT" side of the 120V AC line to TB1-16.
2.4.3 Connect the "NEUTRAL" side of the 120V AC line to TB1-17.
2.4.4 Connect the AC ground to the ground lug to the lower right of the
terminal block TB1.
2.4.5 Controller panel should be connected to the tower and/or building
grounding system with the exception of installations on AM RF
Applications where controller grounding to earth ground is prohibited.
Ground the controller only to the tower itself using a suitable RF
ground.