Twose MAXICUT 280, Руководство оператора

Страница: 32 / 54

15
DETACHING AND STORING YOUR MOWER

Lower the Mower to the ground and park the Tractor with brakes on, kill the engine,
remove and pocket the key.

Wait until the PTO has stopped rotating before dismounting the Tractor.

Disconnect the Driveline from the Tractor PTO.

Disconnect the Top Link and the Lower Lift Links from the Mower.

Always reinstall the Master Shield over the Tractor PTO shaft - this shield should
always remain in place and should only be removed to enable the connection or
disconnection of the Driveline.
DRIVELINE LENGTH CHECK PROCEDURE
A loose shaft could slip off and result in personal injury or damage to the
Mower. When attaching PTO yoke to tractor PTO shaft, it is important that
the spring-activated locking collar slides freely and locking balls are seated in
the groove on the PTO shaft.
Before operating the Mower, check to ensure the Driveline will not ‘bottom
out’ or become disengaged.

Set parking brake, kill engine, remove and pocket the key.

Disengage the Driveline from the Tractor PTO shaft.

Slide the Driveline together until it ‘bottoms out’ solidly.

Apply coloured tape to the Inner Shield ⅛” (3mm) from the end of the Outer Shield (see
diagram below)
Coloured Tape
1/8" (3mm)
Driveline in maximum compressed position