Twose MAXICUT 280, Руководство оператора

Страница: 25 / 54

8
Maxicut 280
INTRODUCTION
These rugged Mowers are designed for medium-duty work. They can mow pastures, cut
brush up to 2”
(50 mm) in diameter, and control grass and weeds on highways or industrial
sites.
For Non-Agricultural use, OSHA, ASAE, SAE and ANSI standards require
the use of Chain Guards, Deflectors or Solid Skirts at all times. The Mower
manufacturer strongly recommends the use of Chain Guards for Agricultural
purposes to reduce the risk of property damage, serious bodily injury or even
death from objects thrown out by, or contact with, the Cutting Blades.
The 9’ Lift Type machine requires a minimum of 50HP
(37kW) with adequate
front end weight.
At least 20% of the tractor’s weight must be on the front tyres with the mower
lifted to provide adequate traction for safe steering under good conditions.
Slow down on hills, rough terrain, and curves.
NOTE: Where the terms ‘Front’ , ‘Rear’ , ‘Left’ and ‘Right’ , are used in this manual it
applies to view the operator has from the normal operating position on the tractor.