Twose MAXICUT 280, Руководство оператора

Страница: 28 / 54

11
OPERATION SECTION
The safe operation of this machine is the responsibility of the operator. The operator
should be familiar with the machine, the tractor, and all safety practices before attempting
to start operation. This Mower is designed primarily for weed and grass control. It is
equipped with updraft blades. The recommended cutting speed for most conditions is from
2 – 5 mph
(3 to 8 km/h). Always operate the tractor at the recommended PTO speed.
IMPORTANT:
To avoid damage to cutter, re-torque all bolts after the first 10 hours of operation.
Re-torque blade carrier retaining nut on gearbox lower shaft to 450 ft. lbs
(610 Nm).
MOWER PREPARATION
LIFT TYPE:
The Category II Hitch, standard on the 96” Mower requires no adaptors to attach to a
tractor with Category II, 3-Point Hitch. To attach to Category I Hitch, optional pins must be
ordered and Tractor Lift Arms are installed between lugs on mainframe. The Tractor Lift
Arms are attached to the Hitch Pins.