Two Technologies TechTerm TT1R2, Техническое справочное руководство

Страница: 11 / 50

TECHTERM TERMINALS
Document 15776(1.0.0.0) 1
C
HAPTER
1
OVERVIEW
About this Manual
Intended for authorized developers with prior knowledge of hand held PC application
development, this manual describes the advanced features, operations and interface
capabilities of Two Technologies’ TechTerm terminals. It is not for use by end-users.
Unless otherwise stated, the operational characteristics described herein correspond to
factory default configurations and settings as shipped from Two Technologies with a
standard 45-key keypad.
Because TechTerm terminals are highly customizable products with several optional
configurations and special keypad layouts, this manual only describes standard features and
operation. For custom configurations and special options, consult the appropriate
supplemental manual or addendum.
It is beyond the scope of this manual to provide operating system tutorials or information
about commercial or customized TechTerm application programs and connected equipment.
This information should be available in the manuals that accompany those products.
Wherever used herein, the term “TechTerm” applies to all models (except as noted).
NOTICE
The information contained in this manual applies only to TechTerm terminals manufactured after
May 2001 (Serial Number HH184408 and above).
Because newer models contain additional functions not found on previous models, use of these
functions on older terminal may cause unexpected results.
Symbols and Conventions
Unless otherwise noted, this manual uses the following format conventions to distinguish
elements of text:
•
New terms used in this manual initially appear in Italics, for example: host .
•
Names of keys as shown on a keypad appear in bold type, for example: CTRL .
•
Names of parameter values appear in uppercase letters, for example: ENABLE.
•
Esc represents the ASCII escape character in Escape commands, for example: Esc [4n
.
•
A lowercase “
h
” appearing
after a number denotes a hexadecimal value, for example: 1Bh .