OPERATION INSTRUCTIONS
E-6
The heater/fan may be operated by the controls located on the heater/fan (see Fig.2).
1.Carefully remove the heater/fan from the plastic bag and the carton.
2.Place the heater/fan on a firm level surface.
3. Main control knob: Use this knob to set the heat setting (Fig.4):
"750 W"– Low Heat Setting
"750W" – Low Heat Setting
"750W+750W" – High Heat Setting (1500 Watts)
"OSC."–Oscillation
"FAN"–fan only (no heat)
"
ON/OFF"–Press “ON” button ,the appliance will be on .Press “OFF” button,the
appliance will be off
.
4.Set the control
a.Make sure the control button is with “OFF“ position. Plug the cord into a 120V
electrical outlet.
b.Then turn the Main POWER Switch on and press the control button to“ON”
position, a red light will come on indicating that there is power to the unit .The
heater is ready to use .
5.Press the “FAN” button,it will blow cool air only.The Oscillation and heat funcation
can only be achieved upon the fan function is in use.
6
.OSCILLATING FUNCTION:
The Oscillating function will work in any mode.
a. Press the “OSC.” button to oscillate the heater fan from left to right at a 90
degree angle .
b.To turn the oscillation off,please press the “OSC.”button again.
7.Heat Function:
a. Press any one of the button “750W",it will be low heat setting.
b. Press two “750W” buttons together,it will be 1500W, in high heat setting.
8.Turn off the appliance :
To turn off the appliance, press the two "750W" buttons together to make the two
buttons raised, then press the FAN and OSC .button again to recover the place.
Finally press the OFF button,turn off the Main Power Switch ,remove the plug from
the wall socket.
SAFETY FEATURES:
1. A thermal overload protector is built in to prevent overheating.
2. When an overheat temperature is reached, the Heater will be automatically shut off.
It can only resume operation,when the user resets the unit.See reset instructions
below;
To Reset Heater:
a. Unplug the Heater and wait 15-20 minutes for the unit to cool down.
b. Then, turn on the unit again and operate normally.
3.The heater comes equipped with a safety tip over switch. It will cut off the power if
the appliance falles down.
