7
Fig. 3
Fig. 4
3.Screw Camlock (AA-1) into the holes in the
pre-drilled holes on the completed assembly from
the step 2, insert one Wood Dowel (CC) into the
holes on the side panels. make sure to tighten
Camlock (AA-1). Push Left Side Panel (E) and
Right Side Panel (F) snug to the Completed
assembly from the step 2. Insert Camlock (AA-2)
into the holes in the side panels. Use Phillips head
screwdriver to tighten Camlock (AA-2).
4. Locate Hearth/Base (A) and lie down on scratch free
surface, Insert Wood Dowel (CC) into the
Hearth/Base, push the completed assembly from
the step 3 to the Hearth/Base as show in diagram,
tighten Screw (BB) through the pre-drilled holes.
CC
F
E
AA
A
CC
BB
Fig. 2
2. Screw Camlock (AA-1) into the holes in the
pre-drilled holes on the Center Top Panel (H), and
insert one Wood Dowel (CC) into the holes in the
pre-drilled holes on the top edge of the front
assembly, then attach Center Top Panel (H). Insert
Camlock (AA-2) into the holes in the left and right
side panels. Use Phillips head screwdriver to tighten
Camlock
(AA-2).
HAND
TIGHTEN
ONLY.
H
AA
CC
Hardware Used
AA
CC
Camlock
x 2
Wood Dowel
x 2
Hardware Used
AA
CC
Camlock
x 6
Wood Dowel
x 6
Hardware Used
BB
CC
x 8
Screw
Wood Dowel
x 8
