twin busch TW SA 42 U V2, Инструкция по установке, эксплуатации и обслуживанию

Страница: 17 / 48

- 18
TWIN BUSCH GMBH
Technical changes, errors and printing mistakes are reserved. V01_NK_418_EN
OPERATION I N S T R U C T I O N S
5.1 Precautions
1. Check all the joints of oil hose. Only when there is no leakage, the lift can start work.
2. The lift, if its safety device malfunctions, shall not be used.
3. It shall not lift or lower an automobile if its center of gravity is not positioned midway of the runways. Failure to do so may cause
damage to property and personnel.
4. Operators and personnel concerned should stand in a safety area during lifting and lowering process.
5. When the platforms are raised to the desired height, switch off the power to prevent any wrong operation done by
unconcerned people.
6. Make sure the safety lock of the lift is engaged before start working under the vehicle and no people under the vehicle
during lifting and lowering process.
2. Descriptions of control panel
POS. Name Function
FA Alarm buzzer Safety warning
SB1 UP button Control the rising movement
SB3 DOWN button Control the initial lowering movement
SB4 DOWN button Control the final lowering movement
SB2 LOCK button Engage the safety locks
SB Emergency stop Stop power in emergency cases
HL Power indicator Show if power is on
QS Main switch Power on /off
SA1 Selection switch Control working or leveling condition
SA2 Selection switch Main lift or secondary lift