twin busch TW 115, Инструкция по установке, эксплуатации и обслуживанию

Страница: 12 / 52

TWIN BUSCH GmbH
Printing errors, mistakes and technical changes reserved ©by TwinBusch Germany
12
Display:
A/B run out compensation display
After calling the rim override function, the display A flashes after the first press of the button, display B flashes after
the second press of the button, displays A and B go out, the third time the button is pressed.
C Battery
When the battery voltage is low, the indicator is red. If the battery voltage is normal, the indicator is green.
D Connection status
If the connection is normal, the indicator lights up. If the connection is not correct, the display goes off.
E LCD Display
Control panel LCD screen Explanation of the display (as shown in the picture)
A Camber, the currently measured value of the camber of the wheel to which the meter is attached.
B Toe, the currently measured value of the single track of the wheel to which the meter is attached.
C Number of the Measuring head 1#, 2#, 3# and 4#.
D Battery capacity in percent indicates the remaining energy of the battery in the measuring head.
E Alignment status indicator indicates the orientation of the measuring head. The measuring head is aligned when
the position mark 0 matches the mark *.
3.10.3 Measuring display
A Toe indicator, the middle green indicator lights up when the toe is within normal limits,
the outer red indicator lights up when the toe is larger than the standard values, the inner red indicator lights up,
if the toe is smaller than the standard values.
B Camber adjustment indicator, the middle green indicator lights when the camber is within normal limits,
the upper red indicator lights when the fall is larger than the standard values, the lower red indicator lights up,
if the fall is smaller than the standard values.
A
B
D
C
E