Inserting a Battery
15
14
Preparing for Use –Thick Tube
1
Lift the notch at the edge of
the battery compartment
and swivel open the door of
the battery compartment.
2
Remove the brown-colored
tab on a new battery (size
312). Insert the battery
with
the positive “
+
” side
facing up
.
Notice the “+” on the edge
of the battery door to
assist you in finding the
proper orientation.
3
Gently close the battery
door. It should close easily;
do not force the door closed.
If resistance is experienced while
while closing the battery door,
Inserting a Battery
ON
–When the battery door is completely closed,
your Tweak is on.
OFF
–To turn off your Tweak, open the battery door part way.
make sure the battery is inserted properly. When the
battery door is completely closed, your Tweak is
ready for operation.
Preparing for Use –Thick Tube
continued
Trimming the Sound Tube
Remove the amplifer and tube
from your ear and cut the tube
0.2” (3mm) above the mark on the
tube. To assemble simply slide the
tube over the end of the earhook.
Connecting Sound Tube to the Earhook
Attach the tube to the earhook
by pushing the open end of the
tube onto the small end of the
earhook until tight.
Attaching a Dome to the Sound Tube
Choose a dome from the
accessories then attach it to
the thick tube by
pushing it
straight onto the tube
until snug.
Instructional videos can be found in the Support section of
TweakHearing.com
Cut here