Daily Use
19
18
Tweak FOCUS+T Setup
NOTE:
If you decide later that you want to reset your Tweak
to a different amplification profile, see page 27.
Congratulations! From now on, Tweak
remembers your preferred amplification setting.
QUIET
BEEP
NOISE
NOISE BURST (Shhhh)
T-COIL
DIAL TONE
From this point forward, you have
three listening modes. Every time
you turn on your Tweak it will start
in the omni-directional (Quiet) mode at mid-volume.
Use the program button to switch between Quiet,
Noise, and Telecoil modes.
To change modes:
Press and hold
the program button for
one second
.
Once you release the button, you will hear a special
sound that indicates which mode or “program” you
have just entered. Quiet program–you will hear a
beep. Noise program–you will hear a “shhhh” sound.
Telecoil program–you will hear a dial tone.
Fine-tuning Your Tweak with the Volume Control
In all three listening modes you can still make minor
adjustments to the volume by simply tapping the rocker switch.
To increase volume:
tap the
upper
portion of the
rocker switch.
To decrease volume:
tap the
lower
portion of the
rocker switch.
Daily Use
ON
When the battery door is completely closed, your
Tweak is on.
OFF
Open the battery door part way to turn off your
Tweak.
You have three listening modes available – Quiet,
Noise, and Telecoil. To switch between Quiet, Noise,
and Telecoil programs,
press and hold
the program
button for
ONE
(1) second. Once you release it
you will hear a confirmation tone: a single beep
for Quiet, “Shhh” for Noise, dial tone for Telecoil.
In
all three programs, you can still adjust the volume by
quickly tapping the rocker switch.
IMPORTANT:
To extend the battery life, turn off your Tweak by
opening the battery door whenever the device is not in use.
Be sure to keep your Tweak dry at all times. See page
20 for additional tips on caring for your Tweak.
Tweak Focus+T Setup
continued