Preparing for Use –Thick Tube
13
12
Preparing for Use –Thin Tube
Your Tweak package includes two sets
of accessories: a pack of thin tubes
and domes/tips plus an earhook
power accessories pack. (See
page 10 for included components.)
Text code on the sound tube, near the
Preparing for Use–Thin Tube
Preparing for Use –Thick Tube
If you’re using the earhook instead of the vented
dome, follow the instructions below.
Connecting the Earhook to the Amplifier
From the earhook accessory
pack (see page 10), choose the
earhook then attach it to the
amplifier by
pushing it straight
onto the post
until the two flat
surfaces are flush together.
Position Amplifier and
Sound Tube on the Ear
Position the amplifier with the
attached earhook over the ear as
shown.
tip represents the length of tube (2B)
and which ear. B=Blue=Left. R=Red=Right.
Installing a Different Tip
Choose left or right tube. A 9mm vented dome is
already attached to each tube.
If you want more bass sound, remove the vented
dome and attach one of the closed dome tips
instead. The tips push on and
pull off the tube. If you change
the tip, be sure it is securely
fastened to the sound tube
before inserting it in your ear. Note: Try decreasing
the volume before switching to the bigger sound
tube and earhook.
Connecting the Thin Tube to the Amplifier
Align the tube connector end
with the end of the amplifier,
then
push the tube straight
onto the sound post.
Measuring the Sound Tube
Next, insert dome comfortably
into the ear canal and align the
sound tube towards the end of
the earhook as shown. Mark the
location where the sound tube
crosses the earhook.