Tvone MOD-32432-DP1FO, Быстрый старт

Страница: 10 / 16

8
3. Connect a DVI cable from the DVI Out port on the ELR-POL Receiver unit to
a DVI display.
4. Connect both AC power cords from the matrix to available electrical outlets.
Connecting both AC power cords will provide redundancy should one of
the power supplies fail. It is recommended to connect each power cord to
electrical outlets on two separate circuits.
Power to the Receiver unit is delivered from the power supply in the matrix
over the CAT-5e cable using Power Over Line (POL) technology.
The Link indicator will glow bright green to indicate a solid connection
between the matrix and the Receiver unit. The Power indicator will glow
bright blue to indicate that the Receiver unit is being powered.
If either of these LED indicators are off , inspect the CAT-5 cable.
DVI cable
to DVI display
DVI-ELRPOL-R
MOD-32432-DVIELR (continued)
1. Connect the up to 32 DVI sources to the DVI inputs on the matrix
using DVI cables.
2. Connect a single strand of SC-terminated 50μ OM3e multimode fi ber optic
cable from each SC connector on the Sender card to each Receiver unit.
MOD-32432-DVI1FO
Multimode Fiber Optic cable
Up to 6600 feet (2 kilometers)
DVI-1FO-R
MOD-8FO-S
Quick Start Guide
5