Tvone MOD-32432-DP1FO, Быстрый старт

Страница: 12 / 16

10
DisplayPort Package Options
6
Each DisplayPort package is based on the DVI package options, except for the
fact that all inputs will be DisplayPort instead of DVI. Refer to the connection
instructions for the DVI version of each package if needed.
• MOD-32432-DPDVI
1. Connect up to 32 DisplayPort sources to the DisplayPort inputs on the
matrix.
2. Connect up to 32 displays to the DVI outputs on the matrix using DVI
cables.
3. Power the matrix.
• MOD-32432-DPELR
1. Connect up to 32 DisplayPort sources to each DisplayPort input on
the matrix.
2. Connect a CAT-5e cable (or better), up to 330 feet (100 meters)
from each ELR-POL jack on the output card to each of the included
ELR-POL Receiver units.
3. Power the matrix.
Once the matrix is powered, the Link indicators will glow bright green
to indicate a solid link between the Matrix card and the Receiver unit.
The POL indicators will glow bright amber to indicate that the Receiver
unit is being powered.
• MOD-32432-DP1FO
1. Connect up to 32 DisplayPort sources to the DisplayPort inputs on the
matrix.
2. Connect a single strand of SC-terminated 50μ OM3e multimode fi ber
optic cable from each SC connector on the Sender module to each
Receiver module.
50μ OM3e, OM3, and 62.5μ OM1 multimode fi ber optic cable can be
used. However, the maximum extension distance is dependent upon
the type of fi ber optic cable used:
• 6600 feet (2 kilometers) using 50μ OM3e multimode fi ber optic
cable.
• 2000 feet (600 meters) using 50μ OM3 multimode fi ber optic
cable.
• 660 feet (200 meters) using 62.5μ OM1 multimode fi ber optic
cable.
3. Connect the power supply to the 1FO Receiver unit then connect the
power supply to an available electrical outlet.
4. Power the matrix.
Quick Start Guide