Tvone MOD-32432-DP1FO, Быстрый старт

Страница: 13 / 16

11
Although each 32x32 Modular Matrix is sold pre-confi gured, both input and output
cards can be removed or added to fi t the needs of the application.
Each card can easily be removed and installed without using any special tools.
1. Power OFF the matrix.
2. Turn the matrix around so the back of the unit is facing you.
3. Loosen the fastening screws on both sides of the card (or cover plate) to be
removed. Each card / cover plate has two fastening screws.
4. Grab the knobs on both sides of the card, between the thumb and index
fi nger, and gently pull to remove the card from the matrix (cover plates do
not have pull-knobs).
7
WARNING: Cards are sensitive to Electrostatic Discharge (ESD)
which can damage the card. Avoid touching the card contacts
or the components on the card. Always hold cards by the edges
or by the knobs on the front of the card. Never slide a card over
any surface. When installing/replacing cards, do not install an
input card in an output slot (or vice versa).
This will damage the matrix and void the warranty.
STOP: Before installing or removing cards and to prevent the
risk of possible electrical shock, unplug the AC power cord from
the power supply(s) on the back of the matrix.
Removing and Installing Cards
Removing Cards
Quick Start Guide