Tvone CORIOmaster2 CM2-547, Руководство пользователя

Страница: 79 / 124

Streaming media and 4K playback input modules in CORIOmaster2™ units support embedded audio, for streams
and media items with the following embedded audio formats:
n
mp3
n
aac
CORIOmaster2 automatically mutes audio from streams with low latency.
Read more about playing audio with your CORIOmaster2 on page 60.
Before you start
n
To stream media from the internet or your network, you need to connect an Ethernet cable and configure the
network settings for your Streaming media and 4K playback input module.
For best results, use Gigabit equipment and cables.
Read about configuring network settings for a Streaming media and 4K playback input module on page 49.
n
To turn any video source into a stream, you need an encoder. The encoder takes video and audio signals,
converts them to an AVIP (Audio-Visual over Internet Protocol) signal, and sends them over your network. For
example, you could encode and stream the signal from an endoscope, or from a camera in a lecture theater.
n
To play media directly from a USB drive, or copy media from a USB drive to internal storage, you need to
connect a USB drive to your Streaming media and 4K playback input module.
Use a good quality, high-speed USB 3.0 drive.
n
To play media saved in the internal storage of the Streaming media and 4K playback input module, you don't
need to connect anything.
n
To play any kind of media you need to set up a video installation with a window playing a channel from your
Streaming media and 4K playback input module.
Read about setting up a basic video wall on page 34.
Adding and editing media streams
You can manually add media streams from your network or from the internet. You can configure and add streams
from an Magenta Encoder-100.
Read about configuring an Magenta Encoder-100 at help.tvone.com/r/docs/cm2/encoder-100/1
PDF-CM2-547-V1.0 tvONE 73