55
13 CORIOmaster Live Screen
Once all the presets have been made the user can use the Live Screen to control their
presentation.
If not already recalled the user should load into the PC the presets. Once loaded the top of
the screen shows all the presets that can be recalled. By pressing any of these buttons
the unit will move to that preset and the outputs produce the correct placement of windows
from that preset.
The lower half of the screen shows which inputs are being presented on each window of
the current preset. If windows and inputs have been named then the user can see easily
which windows are showing which input. Inputs are shown in alphabetical order. The user
has the ability to change the input on a window. This is performed by moving the window
to the new window. In normal mode one or more windows can be moved before pressing
the take. An immediate option is available for quick single input changes.
A Black button is available that sets all outputs to black.
13.1.1 Separate control
To help control the system in Live situations the user may use third party controllers to
perform the same task.
To change a preset the user must send the command
TakeX
where X is the preset
number (starting at 2). They must then copy the preset to be editable by sending
Copy(X,0). This then permits the changing of window sources.
To change a window source the user must know the window number from the canvas.
For window 6 for example to change the source the user must type
Resources.window6.windowSource = slot4.in1. To change the input feeding the window.
