39
Names must start with a non numeric character and the name must not contain any
spaces . In the above picture the SDI input has been renamed Camera_1. Four DVI-U
inputs have been named Video_1, Video_2, PC_1 and PC_2
10.4 DVI-U Output Modules
It is important to select the correct output resolutions for each of the devices connected to
the unit at this stage. Changes of resolution later in the process of generating good quality
results can be compromised by setting different resolutions later. For each output click on
the output resolution line and from the pop up select the correct resolution for the monitor
or projector connected.
It is also important to select whether the output is a
Monitor
or
Projector
as only outputs selected as projectors will be adjusted during an edge
blending process, described later. If a
Router
is connected to an output the
user should select Router for the display type. Outputs on the same
module can’t be used on different layouts. If an odd number of outputs are
required on a layout any unused outputs are best set to
None
.
10.5 Naming Outputs
The user is advised to label outputs. In the output list it is seen that outputs on slots 14
and 15 have been renamed for use later in generating a layout. The same restriction on
names as explained for inputs also apply here. To identify input channels with HDCP
ability a little yellow lock is placed by the input shown the input will work with HDCP
sources.
