38
For RGBHV, RGsB and YUV inputs the user can adjust the horizontal phase to correct for
any video to sync misalignment.
The colour Scale should be left on Auto as the system will chose the appropriate colour
conversion for each input type. However if the input has the wrong colour scale the user
can fix the scale conversion to correct for this.
Contrast and Brightness can be adjusted on both analogue and digital inputs.
The status line will move to OK once an input is connected and correctly locked. The
resolution of the input source detected is shown on this screen. The EDID filename
identifies the file sent to the source to help the device connected to switch to the most
appropriate resolution. If the source device is connected via HDMI the HDMI found line is
set to Found.
HDCP will be described later.
10.2 SDI Input Modules
For SDI Inputs the configuration is minimal. There is no analogue option and no return
channel to the source to permit auto configuration. All the user is given is the resolution of
the received signal. However the user can still adjust the brightness and contrast to help
balance the image before being used within the CORIOmaster
10.3 Naming Inputs
The User is advised to name inputs and outputs to permit easier operation. The default
names relate to the physical slots within the unit. For each input and output the top line
shows the current name.
