TV One C2-6204, Руководство по эксплуатации

Страница: 32 / 105

C2-6204 S
ERIES
O
PERATION
M
ANUAL
27
7.4 Computer & Video outputs
The output resolution from your unit is set in the ‘Adjust outputs’ menu using the
‘Output res.’ menu item. The signal format is also selectable in that menu, with the
following available:
Signal DVI-I output
Analog RGBHV

RGsB (sync on green)

RGBS (composite sync at TTL levels)

YUV/YPbPr (including tri-level)

DVI-D

This is altered in the ‘Adjust outputs’ menu, where the user can select between the
above outputs. The DVI-D output is always active and follows the color-space of
the analog signal.
YUV/YPbPr (component) outputs can also be switched to RGsB (sync on green)
mode if desired -see ‘Adjust outputs’ in this manual for more information.
7.5 SDI/HD/3G-SDI output
These are the maximum available serial digital interface outputs supported:

270Mbit/s (standard definition, 480i, 576i)

1.485Gbit/s (720p, 1080i60 / 1080p30)

2.97Gbit/s (1080p60)
As set by the ‘Output res’ resolution – the DVI-I output and SDI output are always at
the same resolution, with the SDI output only being active when an SD/HD/3G
standard is being output.