TV One C2-6204, Руководство по эксплуатации

Страница: 27 / 105

C2-6204 S
ERIES
O
PERATION
M
ANUAL
22
5 UNPACKING AND INSTALLATION
5.1 Shipping Carton
Your unit will arrive double boxed for maximum protection during shipping. You are
encouraged to retain both boxes and all packing material so the unit can be
returned in the unlikely event that repairs should ever become necessary.
5.2 Important Safety Instructions
The AC power cable furnished with the unit should conform to the type in use in
your country. Please compare the plug on your power cable with the power socket
where the unit will be installed.
If you did not receive the correct cable , DO NOT attempt to modify it. Instead,
immediately contact your dealer or contact TV One at the sales office nearest to
your geographic location and request the proper adaptor.
Please also note that the power supply in your unit is active whenever it is plugged
into the power socket – the ‘Standby’ mode of this product still leaves the power
adaptor active.
5.3 Initial Operation Check Using Factory Default Settings
This product can be operated via multiple methods, but for the purposes of initially
acquainting you with the operation of the unit, this manual will address the
operation using the Front Panel controls.
If you have problems using the unit as described below, see the ‘Factory reset’
description shortly afterwards.
5.3.1 Initial operation and test
The simplest way to check that your unit is operating correctly is:
1. Connect one or more SDI sources to inputs SDI1 through to SDI4
2. Connect a monitor to the DVI-I output connection.
3. Power-up the unit
4. Select the ‘quad-view’ Preset button (left-most button of the built-in presets)
5. Your monitor should now be displaying the input sources you have plugged
in.
Your unit will default to an output resolution of 1280x720p, so make sure your
monitor can accept this.