Tuxedo FP14KO-A, Руководство по сборке и эксплуатации

Страница: 13 / 27

9
.
.
.
P
t
W
t
OPERATION
RAISE-LIFT
1. Press button on power unit
The latch mechanism will ‘trip over’ when the lift raises and drop into each latch stop. But, to lock
the lift you must press the lowering handle to relieve the hydraulic pressure and let the latch set
tight in a lock position.
Always lock the lift before going under the vehicle. Never allow anyone to go under the lift when
raising or lowering. Read the safety procedures in the manual.
LOWER LIFT
1. Raise the lift until the latch clears. Approx. 2”
2. Push air valve for latch release while pressing the lowering handle on the power unit.
Note: It is normal for an empty lift to lower slowly-it may be necessary to add weight.
SAFETY PROCEDURES
z
Never allow unauthorized persons to operate lift. Thoroughly train new employees in the
operation and care of lift.
z
Caution: the power unit operates at high pressure
z
Never permit passengers to ride in the vehicle
z
Prohibit unauthorized persons from being in shop area while lift is in use
z
Never exceed total lift capacity of 14000-lbs.
z
rior to lifting vehicle, walk around the lift and check for any objects that might interfere with
he operation of lift and safety latches; tools, air hoses, shop equipment.
z
hen approaching the lift with a vehicle, center the vehicle wheel on the runway. Slowly drive
he vehicle up on the runways. Have some one outside the vehicle guide the driver.
z
Never use lift to raise one end or one side of vehicle.
z
Prior to lowering vehicle, walk around the lift and check for any objects that might interfere
with the operation of lift and safety latches; tools, air hoses, shop equipment. Slowly drive the
vehicle out. Have some one outside the vehicle guide the driver.
ALWAYS LOCK THE LIFT BEFORE GOING UNDER THE VEHICLE. NEVER
ALLOW ANYONE TO GO UNDER THE LIFT WHEN RAISING OR LOWERING.