MOL
®
LIK module - Operating and Maintenance Manual
Version: 10/2016
MOL Katalysatortechnik GmbH, 06217 Merseburg, Germany
15/ 22
7
Operation
7.1 Required operating conditions
The water flow and thus the treatment rate of the system depend on the raw water quality and the
capacity of the system. In any case, the specifications for the operating pressure and operating tem-
perature must be adhered to.
The maximum values for the operating pressure and the operating temperature
must not be exceeded.
Maximum operating pressure: 0 - 10 bar
Maximum operating temperature: 90 °C
7.2 Operating the system
The operation of the system must comply with the operating instructions and maintenance manual
from MOL Katalysatortechnik, as well as the documentation of the component suppliers. The system
must be regularly checked and maintained (
Point 8
“Maintenance”).
The system must be only operated by trained and authorized personnel. Com-
prehensive knowledge of the system and all its individual components, as well as
knowledge of operation and maintenance are essential.
If an unauthorized modification to the system is carried out without consultation
with MOL Katalysatortechnik GmbH, this is performed at the operator
’s own risk.
The prescribed and required water quality must be ensured solely by the operator
of the system. The use of pre-treated water is only possible if the water quality
requirements have been met.
7.3 Faults
Possible faults, their causes and their remedies:
See point 8.3.
