MOL
®
LIK module - Operating and Maintenance Manual
Version: 10/2016
MOL Katalysatortechnik GmbH, 06217 Merseburg, Germany
8/ 22
In case one of the following circumstances occurs, the device has to be in-
spected by authorized maintenance staff:
The MOL
®
LIK module is not working properly, even though the operating
and maintenance instructions have been followed.
The MOL
®
LIK module has been damaged.
The accessories (optional) exhibit obvious signs of damage.
2.4 Maintenance, repair and cleaning work
Maintenance and repair work must only be carried out by trained personnel!
Shut down the system before performing any maintenance and repair work
on the MOL
®
LIK-module!
Before recommissioning after maintenance and repair works:
Make sure that the MOL
®
LIK-module and/or any other components
which was removed (e.g. the lighting unit) are re-installed and correctly
positioned.
Check that any screw connections are tightened properly.
After completing any maintenance or repair work and before resuming pro-
duction, make sure that
All the materials, tools and other equipment needed for the execution of
any maintenance or repair work have been removed from the working
area of the system,
Any leaking liquids have been removed.
All the system´s safety installations function properly!
Do not insert any objects into the interspaces of the MOL
®
LIK module, this
may damage the catalyst module.
You may be injured if you insert your fingers into the interspaces of the
MOL
®
LIK module.
Do not use a high pressure washer to clean the MOL
®
LIK module.
2.5 Dangers arising if the safety instructions are not observed
Non-observance of these safety instructions can result in danger to persons, material and environ-
ment. If these safety instructions are not observed, any claim for damages may become void.
