MOL
®
LIK module - Operating and Maintenance Manual
Version: 10/2016
MOL Katalysatortechnik GmbH, 06217 Merseburg, Germany
13/ 22
6
Commissioning
In order to avoid faults and damage, please read all the instructions (including the
instructions of the component suppliers) prior to commissioning of the system!
The system may only be started up for the first time by an authorized employee
or service technician from MOL Katalysatortechnik GmbH.
Before each initial commissioning, the operating staff must make sure that a safe
commissioning is possible, and that no one can be injured in the process. All
fittings and fastenings must be checked to see whether they are tightened se-
curely!
6.1 Checks prior to commissioning:
The following points must first be ensured before commissioning the system:
The minimum and maximum values for the operating pressure and operating
temperature must be complied with (
Point 3.2
“Technical data”).
The following additional conditions must be met:
The MOL
®
LIK module has been correctly and completely installed and commissioned.
The MOL
®
LIK module is completely covered with water.
The MOL
®
LIK module is securely fixed and is placed in a location characterized by a good water
flow.
A function test has been carried out on the system with water.
The environmental conditions conform to the specifications.
The operating staff must be trained on all parts of the system and be aware of the structure, func-
tion, operation and maintenance of the system.
All devices, fixtures and fittings are ready for use and are in operating condition.
The supply of raw water is ensured, in accordance with the specification.
The quality of the raw water conforms to the specification and water analysis.
6.2 Basic settings
Before commissioning the system, the basic settings must be made and the val-
ues entered in the list of operating parameters. The basic settings will be carried
out for you by a service technician of MOL Katalysatortechnik GmbH.
These values are optimized following commissioning.
