Tuthill SDV Series Скачать руководство пользователя страница 13

Страница: 13 / 58

Manual 1861 Rev C p/n 001861 0000

GRAPHIC CONVENTIONS USED IN
THIS MANUAL

The following hazard levels are referenced within

this manual:

DANGER

Indicates a hazardous situation that, if not

avoided, will result in death or serious injury.

WARNING

Indicates a hazardous situation that, if not

avoided, could result in death or serious

injury.

CAUTION

Indicates a hazardous situation that, if not

avoided, could result in minor or moderate

injury.

Indicates a situation that can cause damage

to the engine, personal property, and/or

the environment or cause the equipment to

operate improperly.

OTE:

Indicates a procedure, practice, or

condition that should be followed in

order for the equipment to function in the

manner intended.

SAFETY INSTRUCTION TAGS

WARNING

Do not operate without belt

guard.

CAUTION

Do not valve or restrict pump discharge

opening.
Use oil mist eliminator when operating pump,

ensure adequate ventilation when discharging

indoors.
Refer to manual safety instructions.

The above safety instruction tags were

permanently affixed to your pump prior to

shipment. Do not remove, paint over or

obscure in any manner.
Failure to heed these warnings could result in

serious bodily injury to the personnel operating

and maintaining this equipment.

SAFETY

Содержание SDV Series



























































Результаты поиска

Содержание SDV Series

Отзывы:

Tuthill SDV Series, Руководство оператора, Страница: 13 / 58

Результаты поиска

Содержание SDV Series

Отзывы: