Tuthill KINNEY KC Series Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 48

Tuthill KINNEY KC Series Скачать руководство пользователя страница 35

29

Manual 1807 Rev B p/n 001807 0000

The following drawings and parts lists cover all the

parts in each model. Any of these parts may be

ordered from Tuthill for replacement as necessary.

SPARE PARTS

Recommended spare parts are indicated on the

parts lists by an asterisk preceding the description

of the item. This includes all gaskets and O-rings,

the shaft seal, and the discharge valve. It is

recommended that these items be maintained in

stock for use as necessary.

It is also recommended that sufficient AX Vacuum

Pump Oil be kept on hand for at least one oil

change as well as a can of Loctite 515 for sealing

leaks. An accurate vacuum gauge, such as Kinney

McLeod gauge Model TD, be obtained for checking

pump performance.

ORDERING PARTS

When ordering parts, order them by item number

and description, and specify the model and

serial number stamped on the nameplate so that

the pump may positively identified. Tuthill may

substitute newer parts for previous ones if the

particular pump can be identified.

09

REPLACEMENT PARTS

«
...
33
34
35
36
37
...
»

Содержание KINNEY KC Series

















































Отзывы:

Нет отзывов