manualshive.com logo in svg

Tuthill KINNEY KC Series, Руководство оператора, Страница: 11 / 48

Поделиться
Скачать
Tuthill KINNEY KC Series Скачать руководство пользователя страница 11

5

Manual 1807 Rev B p/n 001807 0000

GRAPHIC CONVENTIONS USED IN 
THIS MANUAL

The following hazard levels are referenced within 

this manual:

DANGER

!

Indicates a hazardous situation that, if not 

avoided, will result in death or serious injury.

WARNING

!

Indicates a hazardous situation that, if not 

avoided, could result in death or serious 

injury.

CAUTION

!

Indicates a hazardous situation that, if not 

avoided, could result in minor or moderate 

injury.

Indicates a situation that can cause damage 

to the engine, personal property, and/or 

the environment or cause the equipment to 

operate improperly.

NOTE:  

N

Indicates a procedure, practice, or 

condition that should be followed in 

order for the equipment to function in the 

manner intended.

SAFETY INSTRUCTION TAGS

WARNING

!

Do not operate without belt 

guard.

CAUTION

!

Do not valve or restrict pump discharge 

opening.
Use oil mist eliminator when operating pump, 

ensure adequate ventilation when discharging 

indoors.
Refer to manual safety instructions.

The above safety instruction tags were 

permanently affixed to your pump prior to 

shipment. Do not remove, paint over or 

obscure in any manner.
Failure to heed these warnings could result in 

serious bodily injury to the personnel operating 

and maintaining this equipment.

SAFETY

02

Содержание KINNEY KC Series

















































Отзывы:

Нет отзывов