Tuta D2 Скачать руководство пользователя страница 10

Страница: 10 / 42

Name the camera(s)

YES

Get work status, help and

instruction by sending SMS

command.

YES YES

Set the device by SMS

command.

YES YES

Add/remove sensor(s)

YES

Language version switch

YES

2.2 Arming the camera

When the camera is armed, its motion detector and corresponding sensor are all

activated. If the camera is triggered to make an alarm, it will send the alarm message

to the host. But the alarm message will be sent out only when the host is armed.

2.3 Arming the device/ Armed mode

When the device (including the host and cameras) is armed, it works in armed mode.

All connected sensors and motion detector are in working status. The host will send

alarm message via SMS, MMS upon sensor alarms or detection of any motion within

the monitoring area.

2.4 Arming the device manually

Arm the device (including the host or camera) by sending SMS commands or click

ARM button on the TUTA WIRELESS IMAGE MONITORING SYSTEM.

2.5 Arming the host

When the host is armed, if the connected camera is armed too, the host will send an

alarm message via SMS, MMS upon sensor alarm or detection of any motion within

the monitoring area. These alarm messages will be sent to the

Watchman

number

which corresponds with the alarm camera.

If the host is not armed, the host will not send an alarm message out even if the

connected camera is armed.

2.6 Automatic alarm

The device will make an automatic alarm only when the device is armed. When the

connected sensor alarms or any motion is detected within the monitored area, the

device will make an automatic alarm.

If the host is connected with a management computer which has installed the TUTA

WIRELESS IMAGE MONITORING SYSTEM, the computer will pop up to show the

automatic alarm information and store all the alarm images.

Содержание D2











































Результаты поиска

Содержание D2

Отзывы:

Похожие инструкции для D2

Бренды по названию

Популярные бренды

Tuta D2, Руководство пользователя

Результаты поиска

Содержание D2

Отзывы:

Похожие инструкции для D2

Бренды по названию

Популярные бренды