manualshive.com logo in svg

Tut Systems XL-12000S, Руководство пользователя

Поделиться
Скачать
Tut Systems XL-12000S Скачать руководство пользователя страница 59

XL-12000S

MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE

9.0  MODEM STATISTICS

TUT SYSTEMS

51

FIELD

DESCRIPTION

In Delivers:

The total number of incoming IP packets successfully delivered to 
IP user protocols (including ICMP).

Forwards:

The number of incoming IP packets for which the modem was not 
the final IP destination, and as a result, the modem tried to find a 
route to forward them to that final destination.

Out Requests:

The total number of IP packets that the local user protocols 
(including ICMP) supplied to the IP in requests for transmission.

Out Discards:

The number of outgoing IP packets for which no problems were 
encountered to prevent their transmission to their destination,
but that were discarded (e.g., for lack of buffer space).

Out No Routes:

The number of IP packets that were discarded because the 
modem could find no route to transmit them to their destination.

Press <Ctrl-X> to return to the Main Menu.

Содержание XL-12000S















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды