Tut Systems XL-12000S, Руководство пользователя

Страница: 51 / 78

XL-12000S
MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE
8.0 ADVANCED MODEM FEATURES TUT SYSTEMS 43
To return to the Main Menu without saving your changes, press
<Ctrl-X>.
To access the modem via the Tut Enterprise MIB, load and compile
the file “modem.MIB” from the enclosed floppy diskette to your
NMS system.
8.2 Modem DHCP Relay Agent
If Dynamic Host Configuration Protocol (DHCP) Relay is enabled, a
DHCP session between a host connected to the XL-12000S modem
and a server reachable by either the LAN or DSL ports of the
XL-12000S may take place. This allows host parameters including
DHCP assigned IP addresses to be transferred from the server to the
host. This feature is usable in Routing or Bridging Non-IP mode.
If both modems are in routing mode, the LAN interface IP address
needs to be entered on the modem connected to the DHCP server.
The SDSL Interface IP address needs to be entered on the modem
connected to the PC.
Figure 8.2 DHCP Relay Agent Screen