Tut Systems XL-12000S, Руководство пользователя

Страница: 33 / 78

The “Routing/Bridging” field in the Modem Configuration screen
will be set to bridge_non_ip.
The static routing table fields in the Modem 1 Configuration would be:
Destination Mask Gateway Hops
192.168.4.0 255.255.255.0 192.168.3.2 1
For Modem 2:
The “LAN IP address” field in the Modem Configuration screen will
be set to 192.168.4.1
The LAN “Subnet Mask” field in the Modem Configuration screen
will be set to 255.255.255.0
The “DSL IP address” field in the Modem Configuration screen will
be set to 192.168.3.2
The DSL “Subnet Mask” field in the Modem Configuration screen
will be set to 255.255.255.0
The “Master/Slave” field in the Modem Configuration screen will be
set to Slave.
The “Routing/Bridging” field in the Modem Configuration screen
will be set to bridge_non_ip.
The static routing table fields in the Modem 2 Configuration would be:
Destination Mask Gateway Hops
192.168.2.0 255.255.255.0 192.168.3.1 1
4. Block Packets
This selection disables routing and bridging and blocks all user traffic.
This option allows communication with the modem for diagnostic
testing or configuration via Telnet or SNMP but does not pass any
traffic. Use this feature for diagnosing network problems.
Note: No user pinging will work for testing purposes.
The examples above were provided as a simple guide. The XL-
12000S can be used in many other combinations. Other helpful hints
when using the XL-12000S as a router include:
XL-12000S
MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE
7.0 CONFIGURE THE MODEM TUT SYSTEMS 25