manualshive.com logo in svg

Tut Systems XL-12000S, Руководство пользователя

Поделиться
Скачать
Tut Systems XL-12000S Скачать руководство пользователя страница 38

XL-12000S

MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE

30

TUT SYSTEMS

7.0  CONFIGURE THE MODEM

Figure 7.7  Serial Session/Version ID Screen

The section continues by describing how to initially configure the
modem via the Console port.

7.2.3.2  Login Display

User Login

At the Login Display the User Login field is presented. The user
login refers to a class of user. 

Note: “Craft” is the only available user login and is displayed during login.

The system login time is one minute. If this time is exceeded, before
keyboard activity begins, the session will be closed. The message
“Login time exceeded” will be displayed and you will have to press
<Enter> to connect to the XL-12000S. If you were connected via a
Telnet session you will have to reconnect.

New XL-12000S modems are not password protected until you
assign a password. Instructions for changing your password will be
provided later in this manual (section 7.2.3.7). Attempting to enter a
password will generate a “Password incorrect” error message. At this

Содержание XL-12000S















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды