Page 9
Step 5: Turn on the headset power
1. Press and hold the power switch
(6)
for a couple of seconds, then release. The
Turtle Beach logo on the left ear cup should start flashing. If it doesn’t, make sure
the batteries are inserted properly. If they are, then try a different set of batteries.
2. Turn up the volume control
(7)
and listen for sound from your XBOX. The top
LED on the front of the transmitter should be on solid when the headset and
transmitter are communicating. If there’s no sound, check the
“Troubleshooting Tips”
.
STEP 6: Configure the XBOX audio settings
1. In the
System Settings
section of the XBOX Dashboard, select
Console Settings
,
then select
Audio
.
2. In the
Audio Settings
area, select
Digital Output
then
Dolby Digital 5.1
to activate
the Dolby Digital output.
3. Start your game.
To turn off the power
, press and hold the power switch until the LED turns on.
Once it’s on, release the button and the power will turn off.
Automatic Power Shut-off
To conserve batteries, the headset will turn off after several minutes if there’s no
sound or if the transmitter is turned off. In this case, the LED on the left ear cup
will flash faster to indicate that it will soon shut off.
Using an HDMI connection for video
If your TV only uses an HDMI AV connection, you must still use an XBOX 360 AV
cable to connect your X41 audio to the XBOX. This cable set is included with the
XBOX Elite model. If you do not have an XBOX Elite, the optional Elite AV cable is
compatible with any other XBOX model. It is available to purchase from the official
XBOX website: http://www.xbox.com/en-us/hardware/x/xbox360hdmiavcable/
Setting up the XBOX 360 and Ear Force X41 (cont’d)
