Page 8
STEP 1: Connect the XBOX to the X41 Transmitter
1. Connect the XBOX 360 AV cable to
your XBOX as described in the
XBOX User’s Guide.
2. Connect the X41 TOSLINK digital
optical cable (included) from the digital
output on the XBOX AV cable
(1)
to the
digital input on the transmitter
(2)
.
Note: Remove the protective caps
from each end of the optical cable
before inserting it into the sockets.
Step 2: Connect the power
1. Connect the X41 DC power cable to the
X41 power socket
(3)
. Plug the other side
into a free USB port on the XBOX.
2. Press the power switch
(4)
. Check if
the X41 front panel LEDs turn on.
Step 3: Insert the headset batteries
1. Remove the battery cover in the
right ear cup by pushing in and down.
2. Insert the two included AAA batteries
with the positive side facing down.
3. Replace the battery cover.
Step 4: Insert the mic boom
1. Insert the mic boom into the jack (5) so
that the holes in the mic casing are
facing your mouth.
2. Place the foam cover over the mic if desired.
Setting up the XBOX 360 and Ear Force X41
DIGITAL
OUT
IN
DC 5V
POWER
+
-
+
AA
A
BA
TTE
RY
-
+
AA
A
BA
TTE
RY
-
EFFECTS
POWER
X41 AV Cable
TOSLINK cable
included with the X41
X41 transmitter
rear view
XBOX 360
X41 power cable
Insert the X41 USB
connector into a
USB port on the XBOX
Insert the batteries with
the positive side down.
To remove the battery cover,
push in and push down.
Remove and replace the
foam cover so you can see
the mic position.
Insert the boom so that
the holes in the mic casing
and the marker on the jack
are facing your mouth.