Page 5
Power Switch:
Turn on the headset
by pressing the power switch (1) for
a couple of seconds, then release.
The power LED (5) should start
flashing. Turn off by pressing the
button (1) until the LED (5) stays on,
then release.
XBOX Controller Jack:
Insert the
straight connector on the talkback
cable (see below) here.
Effects Button:
Press this button
to activate the bass boost effect.
A high pitched beep indicates that
bass boost is on. Press again and a
low pitched beep indicates that it’s
turned off.
Game Volume:
Turn to adjust the
game sound level. The XBOX LIVE
chat volume may be independently
set by the volume control on the
talkback cable.
Power LED:
Flashes about once per
second when power is on. To con-
serve batteries, the headset will turn
off after several minutes if there’s
no sound or if the transmitter is
turned off. In this case, the LED on
the left ear cup will flash faster to
indicate that it will soon shut off.
Microphone socket:
Insert the re-
movable mic boom here. The socket
is notched to prevent the boom from
rotating after insertion.
To properly position the mic,
remove the foam cover, insert the
boom into the socket (6) so the
holes on the mic casing (7) are
facing your mouth. Then replace the
foam cover. The boom jack also has
a marker to indicate the proper mic
position.
LEFT EAR CUP
MICROPHONE
X41 Headset and Talkback Cable
Markers on the jack
indicate the proper
position when the foam
cover is on the mic
ON -
- OFF
BASS BOOST
POWER
EFFECTS
Remove the foam cover
and insert the mic boom
so the holes in the mic
casing are facing your mouth.
Then replace the foam cover.
