Turtle Beach Audio Advantage SRM, Руководство пользователя

Страница: 28 / 59

www.Turtle-Beach.com
Page 24
Canceller are enabled, disable all of them. Once you hear the DVD in unaltered 5.1 surround
sound, you can go back and use these enhancements to suit your taste.
Adjust the individual 5.1 channel levels with the volume controls on the Speakers Tab.
Using the Digital Audio Output
To use the digital audio output for playing DVD audio, connect a TOSLINK optical cable
to SRM S/PDIF output by inserting the included Optical Adapter into the Line Output jack.
Then connect the other end of the TOSLINK cable to your digital speakers or an A/V
receiver. The TOSLINK optical cable is available at
www.TurtleBeach.com or at many
consumer electronics retailers.
⇒
Note that the digital speakers and A/V receiver must have an integrated Dolby
Digital Decoder to process the digital 5.1 signal.
In Windows 2000/XP … set the S/PDIF settings pull-down menu in the SRM control
panel to S/PDIF Out 48kHz , to transmit the digital signal. Note that when the digital
output is enabled, you can see a red light inside the digital optical output or at the end of the
optical cable plugged into the digital output.
In Windows Vista… in addition to setting the SRM Control Panel’s S/PDIF settings pull-
down menu to 48 kHz, you must also set the Digital Output as your default playback device
in the Vista Sound Control Panel. Click
Start
Æ
Control Panel
Æ
Sound and select
“ Digital Output – Audio Advantage SRM Device ” as the Default Playback Device.