Please refer to the label of USB Linker and correctly connect the receiver lead of ESC to USB Linker.
Connect the USB Linker to one of the available USB ports of PC. A little red LED on USB Linker will
light up. The green LED on the controller would light up while connecting is successful other wise not.
When successfully connect to PC, the computer will automatically recognize a ‘com port’ as the name
“CP210
×
USB to UART Bridge Controller” ,
please find the correct ‘com port’ number on you PC in this
way.
The com port is generally ‘com 3’ or ‘com 4,’ but there are different ‘com port’ on different computers. You can find
the accurate com port on your computer in this way:
Click the right button of mouse the icon ‘My Computer
’
→
Manage
→
Device Manager
→
Ports(Com & LPT). The‘com port’after
“CP210
×
USB to UART Bridge
Controller”
is the right one.
Note:
If you cannot find such kind of ‘com port’ in the ‘Device Manager’, please check whether the connection of ESC to
USB Linker is correct and ensure they are tightly connected without any loose. If they are both right, the problem is probably
that the software has not been successfully installed on your PC. Please Install the soft again.
Program the ESC
NOTE:
Never plug the USB Linker to USB port of PC BEFORE installation of software is successfully completed.
If you installed the Turnigy software
correctly, the item will be displayed in
Device Manager
TURNIGY AQUASTAR ESC MANUALS 7 page / 12 pages
