·
Cutoff Type
NOTE: Soft cutoff is always automatically active in Governor Mode.
·
Start Type
·
PWM Switching Rate
Note: we strongly recommend only the experienced modeler could change this setting.
Option 1 :Hard cutoff (default)
When battery voltage reaches cut-off voltage the motor will shutdown
immediately. Motor can be restarted by closing the throttle to the lowest position
and then move the throttle as normal
Option 2: Soft cutoff
When battery voltage reaches cut-off voltage, the ESC will slowly reduce
motor
power to zero, you will notice a decrease in power and it is time to land, the
throttle maintains its full linear response.
Option 1: soft start
Very soft and smoothly start the motor, it will takes more time
Option 2:standard start (default)
Start the motor at normal speed
Option 3: Fast start
Fast star up, recommended to use it for racing.
Option 1:8KHz(default)
Recommended for most brushless motors
Option 2: 12KHz
Recommended for low inductance motors
Option 3: 16KHz
Recommended for very low inductance motors
TURNIGY AQUASTAR ESC MANUALS 11 page / 12 pages
