A. Program by TX stick
Turnigy
®
ESC support to fully program by TX stick, please refer to the setting diagram in the last page.
B. Program by
Turnigy
®
LCD Program box
Program box is auto identify the ESC model and clearly display the corresponding programmable parameters in LCD. It is
pocket size and conveniently take to use at fields. Please read the instructions of Program box to correctly set the
Turnigy
®
ESC.
C.
Program by software
‘
Turnigy
®
Aquastar ESC’ on PC.
The set-up software of
‘
Turnigy
®
Program’
is recorded in a CD and always attached with each
Turnigy
®
ESC. You must
install the software on PC. Please refer to the
Ⅳ
sections.
- After changing the ESC’s parameters, It Is suggested to firstly have a test on the testbed before assembling
It to hull so that to choose appropriate settings for the matched power configuration.
Please always keep the prop far
away from human and objects In testing.
- Reconnect the ESC to battery, the green LED on ESC will light for a second. And two beeps emitting out
from motor while Indicates to successfully detect the signal. Then It Is time to go now.
NOTE
: If the LVC of ESC Is set In “Auto’, after the two beeps there will follow beeps to detect the Lipo
cells while the red LED flashing.
It Is ready to go now!
TURNIGY AQUASTAR ESC MANUALS 4 page / 12 pages
