A. Board Style
transmitter calibration
- Correctly connect the ESC with brushless motor, plug the receiver lead of ESC into receiver ( usually into
Channel 2);
- Put the throttle to the forward top position, turn on the transmitter;
- Power on the receiver, ESC and motor. There are 3 beeps emitted from the motor, which indicates all
electronics are correctly power on for the setting.
- Then there are 4 long beeps emitted from the motor
♪
♪
♪
♪
.
- During or after the 4 long beeps , move the throttle stick to the ‘0’ position you want to set, at this point, you
have calibrated the throttle range of your
transmitter;
- Waiting one second, there will be two beeps
emitted from the motor
- Calibration of throttle is completed.
Note:
1. Recommend the ‘0’ position should not be set higher beyond the 50%.
2. Motor is needed to install for acoustic guide. Meanwhile, please keep the propeller away from human beings or any
objects.
B. Pistol style
transmitter calibration
- Correctly connect the ESC with brushless motor, plug the receiver lead of ESC into receiver ( usually into
Channel 2);
- Put the throttle to the forward full position, turn on the transmitter;
- Power on the ESC, there are 3 beeps emitted from the motor, which indicates all electronics are correctly
power on for the setting.
- Then there are 4 long beeps emitted from the motor
♪
♪
♪
♪
.
- During or after the 4 long beeps , move the throttle to the neutral position. Two beeps
emitting out
indicates calibrating is completed.
- Following two beeps are powering beeps, it is time to go now!
The
Turnigy
®
Aquastar ESC programmable settings
:
Note:
1. Parameters with asterisk * behind is the default settings of ESC.
LVC Is preset In ‘6.0V’ In factory.
2. The throttle range can be read on PC after installing ‘Turnigy
®
A q u a s t a r E S C ’ software. It is Auto changed
after calibrating the throttle range of transmitters.
3. When use Lipo-Polymer battery pack, please carefully set the LVC to efficiently protect the battery against
discharging.
♪
♪
LVC
Auto*
5.0V
6.0V
(2 Lipo)
7.2V
8.4V
9.0V
(3 Lipo)
12.0V
(4 Lipo)
15.0V
(5 Lipo)
18.0V
(6 Lipo)
Brake Type
Close *
Soft brake
Timing Advance
Low
Middle
High
Auto *
Cutoff Type
Hard cutoff *
Soft cutoff
Startup Type
Soft start
Standard *
Fast start
PWM Rate
8KHz *
12KHz
16KHz
Throttle Range
640 uS
Program the ESC
Calibrate the throttle range of transmitter
(Recommend)
♪
♪
TURNIGY AQUASTAR ESC MANUALS 3 page / 12 pages
