Turner 2180-000, Руководство пользователя

Страница: 7 / 21

Turbidity Plus Sensor
998-2187 Rev. G Page 7
2.4 Functional test for Turbidity Plus with connector with Fondriest Cable P/N
MCIL-8-FS-5/10 5 or 10 meter Pigtail Cable with Locking Sleeve .
To perform a functional check on Turbidity Plus, connect the Fondriest Cable
colored wires to the power supply and multi-meter as shown in Figure 2 below.
Additional Equipment required for functional tests:
DC Power Supply: 3-15 VDC, >100 mA
Multi-meter to read: 0
– 5 VDC
Note: Supply voltages greater than 9 VDC will result in damage to the
sensor.
Figure 2.
12.00 .015
+ -
DC Power Supply
PSU Positive Connection
Red (3)
Supply Ground
0 VDC Brown (4)
3.52
Multimeter
10 VDC
+
-
Signal Output
“+” Yellow (5)
Analog Ground
“-” White (6)
Orange (1) Black (2)
No Connection
Turbidity Plus Pigtail Cable
Home Signal
Blue (7)
Wiper Trigger
Green (8) Orange Cable
Wire Color
Pin Function
Orange 1 N/A
Black 2 N/A
Red 3 Supply Voltage 3-15 VDC
Brown 4 Supply Ground 0 VDC
Yellow 5
Signal Out “+”, 0-5 VDC
White 6
Signal Ground “-”, 0-5 VDC
Blue 7 Home Signal
Green 8 Wiper Trigger. 3.2 VDC
Turbidity Plus pins
2
4
6
3
1
5
7
8
2
5
2
6
4
7
1
5
3
2
8
5
Orange
cable holes