Turn of the Century
TM
Downrod
Clip
Set Screw
Yoke
Downrod
Pin
5
ASSEMBLY INSTRUCTIONS
2
1
1. Turn OFF the electrical power at the main fuse or circuit
breaker.
2. Loosen all four mounting brackets screws, then
completely remove the two mounting bracket screws
from the round holes of canopy. Set screws aside for later
use. Then, install the mounting bracket to the outlet box
(not included) using the screws and washers provided
with the outlet box.
Warning:
To reduce the risk of fire electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” using the mounting screws
and washers provided with the outlet box.
4
3.
CLOSEMOUNT INSTALLATION
(OPTIONAL)
a. Remove the canopy cover from the bottom of the
canopy.
b. Remove the three Phillips-head closemount screws from
the top of the motor housing.
c. Align the holes in the bottom of the canopy with the
screw holes in the top of the motor. The larger holes in the
canopy will encompass the three pre-installed screws.
d. Secure the canopy to the top of the motor with the
closemount screws that were previously removed.
e. Hang the fan on the hook of the mounting bracket to
free hands during wiring process.
Proceed to Step 8.
Closemount
Screw
Canopy
Mounting
Bracket
Mounting
Bracket Screw
3
DOWNROD MOUNT
4. Remove the downrod pin and downrod clip from the
downrod. Then, loosen but do not remove the two set
screws in the yoke.
