7
Turn of the Century
TM
Blade Screw
Blade Washer
Blade Arm
Blade
ASSEMBLY INSTRUCTIONS
11
9. Raise the canopy, ensure the two mounting bracket
screws are aligned with the J-shaped slots in the canopy.
Then turn the canopy counter clockwise until the
mounting bracket screws are completely engaged in
the J-shaped slots. Install the two previously removed
mounting bracket screws in the round holes. Securely
tighten all four mounting bracket screws.
10. Remove the motor screws, washers and motor
blocks from the underside of the motor assembly.
Discard the motor blocks and washers, but keep the ten
motor screws for installation of the blade arms.
10
9
Canopy
Round
Hole
Motor
Block
Motor Screw
Washer
Mounting
Bracket Screw
J-shaped Slot
11. Partially insert three blade screws, along with the
blade washers, through the blade and into the blade arm.
Tighten each blade screw, starting with the one in the
middle. Repeat this step for the remaining blades and
blade arms.
Motor
Screw
Blade Arm
Blade
Isolator
Motor
12
12. Secure the blade arm to the underside of the motor
using a blade isolator and motor screws removed in
Step 10. Secure each blade arm to motor before moving to
the next.
