8
Turn of the Century
TM
ASSEMBLY INSTRUCTIONS
13. Slide the end of the blade arm through one of the
slots in the side of the motor assembly. Then, use the
motor screws to secure the blade arms to the underside
of the motor assembly. Securely tighten each blade arm
before moving to the next.
13
14. To install the light kit, connect the single-pin connector
from the motor assembly to the single-pin connector from
the light kit -- Blue to Black and White to White. Reinsert
two of the previously removed light pan screws into the
light pan, but do not tighten.
Place the keyholes of the light kit over the light pan
screws and turn clockwise. Secure the light kit with the
previously removed light pan screw. Tighten all three
light pan screws.
15. Lift the lens cover over the light kit and turn clockwise
until its secure.
Lens Cover
Light Kit
Blade Arm
Slot
Motor Screw
Light Pan Screw
14
15
Blade Screw
Blade
Screw
Cap
Blade Arm
Blade
12. Partially insert three blade screws through the blade
arm and the blade. Secure each blade screw with a blade
screw cap, starting with the one in the middle. Repeat this
step for the remaining blades and blade arms.
12
