Turn of the Century
TM
5
ASSEMBLY INSTRUCTIONS
2
1
1. Turn OFF the electrical power at the main fuse or circuit
breaker.
2. Remove the canopy from the mounting bracket by
removing the two mounting bracket screws from the
round holes in the canopy and save for later use. Then
loosen the other two mounting bracket screws from
the L-shaped slots. Install the mounting bracket to the
outlet box (not included) using the screws and washers
provided with the outlet box.
Warning:
To reduce the risk of fire electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” and use the mounting
screws and washers provided with the outlet box.
3. Remove the three light pan screws and the packing
material. Discard the packing material from the top and
bottom of the fan assembly but save the three light pan
screws for later.
For downrod installation skip to Step 5.
4
4.
CLOSEMOUNT INSTALLATION
(OPTIONAL)
a. Remove the canopy cover from the bottom of the
canopy.
b. Remove the three Phillips-head closemount screws from
the top of the motor housing.
c. Align the holes in the bottom of the canopy with the
screw holes in the top of the motor. The larger holes in the
canopy will encompass the three pre-installed screws.
d. Secure the canopy to the top of the motor with the
closemount screws that were previously removed.
e. Hang the fan on the hook of the mounting bracket to
free hands during wiring process.
f. Place the receiver into the opening in the mounting
bracket.
Skip to Step 10.
Closemount
Screw
Canopy
Receiver
Mounting
Bracket
Mounting
Bracket Screw
Packing
Material
Packing
Material
3
