© Trynex International 2012
8
Safety
Inspect Machine before each use
Examine the machine prior to each use. Do Not use the machine if any parts are not in good working condition.
• Check for worn tires, cracks in parts, loose or missing bolts,cotter pins etc. and replace or repair before operating.
• Make sure all safety devices are present and in good working order, including all the safety labels, Shields, Brakes, the Neutral Safety Switch System, and
Throttle/Centrifugal Clutch which disconnects the power to the drive wheels when released. (To test the Brakes, Neutral Safety Switch System, and Throttle/
clutch, follow instructionsin the Driver’s Training and Operation section of this manual.)
• Make any necessary repairs or adjustments before starting the engine and/or operating the machine.
Engine Starting Safety
Do Not attempt to start the machine if any of the following apply:
• You are in a confined space.
• You or someone else could be trapped between the machine and a solid obstacle should the machine unexpectedly move upon startup. Remember to check
for low hanging obstacles such as tree branches, clotheslines, etc.
• You are not certain of firm, dry, level footing to prevent loss of balance
Before attempting to start engine:
• You must move the machine to a solid, level, dry, open area before starting the engine.
• Verify the machine is in Neutral. The machine rolls forward easily in neutral.
• Lock front brake and apply the sulky brake.
• Do Not operate the Throttle.
Do Not attempt to start or operate the machine if:
• The Neutral Safety Switch System or any other safety device is not working.
• The Throttle/Clutch does not move freely and automatically and rapidly return to the idle position.
• The idle engine speed exceeds 1650 RPM upon starting.
• The machine unexpectedly moves upon starting or when shifting gears.
Avoiding slipping or tripping injury
Use caution when riding on, and getting on and off the RS7200.
• Keep a firm grip on the handles with both hands.
• Stand only on the footpads. .
• Keep footpads clean.
• Replace worn or damaged footpads.
Forward Operation
Loss-of-control may cause death or serious injury.
• Always keep a firm grip on the handlebars with both hands.
• Operate the machine in 1st Gear until you become familiar with it.
• Never operate the machine at a greater speed than is reasonable in light of the conditions presented.
• Only operate in 1st Gear on slopes, inclines, bumpy ground, or high grass.
• Avoid sudden starts, stops and turns as they may cause you to lose your balance and be thrown from the machine.
Reverse Operation
Loss-of-control may cause death or serious injury.
• Always keep a firm grip on the handlebars with both hands.
• Do Not back up if there is a possibility you or a bystander could become trapped between the machine and an immovable object or barrier.
• Always look behind and down before backing up to be sure of a clear path.
• Always look behind and up before backing up to be sure the path is clear of low hanging obstacles such as tree branches, clothes lines, and low doorways.
• Use extra caution backing up when in an enclosed area.
• Backup slowly, until you become familiar with how the machine handles.
• Never coast backwards. Instead back up under power and in Reverse Gear with the Throttle engaged using the brakes as necessary.
• Use extra caution backing from an awkward location or position.
• Keep both feet firmly on the footpads whenever possible.
• Backing up while in the walking position is hazardous and in most cases can and should be avoided. However, when backing up from the walking position is
unavoidable (such as when unloading the machine from a trailer), use extreme caution.
Содержание RS7200
Страница 27: ...27 Trynex International 2012 Maintenance Page Left Intentionally Blank ...
Страница 40: ... Trynex International 2012 40 Handle Parts Breakdown Model RS7200 14 13 7 11 6 5 8 10 1 9 12 4 2 3 ...
Страница 52: ... Trynex International 2012 52 Notes ...
Страница 53: ...53 Trynex International 2012 Notes ...