TurfEx RS7200, Руководство владельца/оператора

Страница: 11 / 53

11
© Trynex International 2012
Safety
Parking
Anytime you leave the operator position, you must:
Stop on level ground.
• Turn off the engine.
• Lock Brake Lever.
• Shift into Neutral
Never leave the machine unattended on an incline or slope where someone could disengage the brakes and the machine could roll.
When leaving the machine unattended, close fuel shut off valve.
Tire Safety
Tires are filled with pressurized windshield washer solution to provide ballast for a lower center of gravity. Explosive separation of rim and tires
may cause serious injury.
• DO NOT remove fluid from tires.
• All replacement tires must be fluid filled.
• Wear a face shield when checking, filling, and repairing fluid filled tires.
• Do not attempt to check, repair or replace fluid fill tires without the proper equipment.
• Use a clip-on chuck and extension hose. Stand to the side of the tire when filling.
• Always maintain tire pressure at 12 PSI. Do not under or over inflate tires.
• Rear tires have split rims. Release tire pressure prior to loosening any nuts or bolts.
• Never weld or heat the tire rims as this could cause a tire explosion or structural damage to the rim.
• Check tires often for cuts, wear, bubbles and missing or loose lug nuts. Check pressure often.
• Fix or replace worn or damaged tires, rims, and hardware.
• Always replace tires with genuine Turfex liquid-filled tires and rims.
Maintenance and service
Improper maintenance can cause serious injury.
• Lock brakes, stop engine and disconnect spark plug wire. Wait for all movement to stop before adjusting, cleaning or repairing .
• Clean grass and debris from drives, mufflers, and engine to help prevent fires. Clean up oil or fuel spillage.
• Let engine cool before storing and do not store near flame.
• Shut off fuel while storing or transporting. Do not store fuel near flames or drain indoors.
• Park machine on level ground. Never allow untrained personnel to service machine.
• Use jack stands to support components when required.
• Carefully release pressure from tires and spray system.
• Remove spark plug wire before making any repairs.
• Keep hands and feet away from moving parts. If possible, do not make adjustments with the engine running.
• Keep all parts in good working condition and all hardware tightened.
• Replace all worn or damaged Machine Safety Labels.
• Replace worn or damaged footpads.
• Perform all scheduled maintenance as directed in the Service Manual
Pesticide Safety
.
The improper use, handling, application, and disposal of pesticide products applied by this machine may cause death or serious injury.
• Read and follow product label and Material Safety Data Sheet (MSDS) precautions for handling, mixing, applying, and disposing of pesticides applied by this
machine. Some materials may present health hazards that will require the use of Personal Protective Equipment (PPE). Always wear required PPE.
• Keep required PPE available for use by the operator or mechanic at all times.
• Keep pesticide labels and MSDS available for the operator or mechanic at all times.
Handling and disposal of hazardous waste products
.
Dispose of all hazardous waste products properly.
• Clean up hazardous waste spills immediately.
• Refer to the Pesticide Label for proper handling and disposal instructions.
• Refer to MSDS for proper handling and disposal instructions.
• Wear the Personal Protective Equipment specified on MSDS and Pesticide Labels.
• Before disposing of hazardous waste check with your local regulatory agency.