7
86511 Rev A
86511 Drop Seeder Attachment
Step 8. (See Figure 8)
Install battery harness
A. Attach ring terminals to battery. Red wire to +, black wire to -
B. Connect pink wire to double spade connector on hourmeter
C. Connect three pin connector to main wiring harness
Step 9.
Test seeder
A. Reattach battery cables
B. Turn key to ON position
C. Move gate lever to ON, hopper gate should open, electric motor should turn
on to turn the agitator inside the hopper
Figure 8
RING TERMINALS
3 PIN CONNECTOR
DOUBLE SPADE
CONNECTOR
